IP66, All Weather, Anywhere!
P-1 adapts to any outdoor environment that that are not suitable for GPS devices, whether in ice, frost, rain, snow, or on desert, Gobi, beach...
P-1 is built with the highest protection of its breed* for all-weather operation, providing normal logging even with prolonged exposure to high humidity and dust.
P-1 also works in an extended range of temperature from -10°C to 50°C, to ensure normal use in high latitudes and tropical areas.
*IP66 compliant. Always tighten its rubber cover at the bottom before use.
50-hours Super Long Battery Life
Your newly delivered P-1 guarantees more than 50 hours of operation*, enough for a whole week's work (logging 10 hours per day, 5 days per week) and outperforming any competitor available on the market (according to the statistics in October 2018).
*Continuous logging at 10Hz and 20°C environmental temperature.
Dual Function Button
P-1 has unique dual function buttons, and the function button can be defined as multiple functions according to your requirement.
You can pause/continue logging at any time! The start and stop can avoid a large amount of redundant data and optimize the track information.
It is also possible to add two different types of POI.
Intelligent Mode: Auto Power On and Spy Mode
P-1 is automatically powered On/Off with the vehicle, no need for manual management.
In the Spy mode, P-1 enters a silent and light off working state and can increase the endurance to 7 days.
G-Sensor for Motion Detecting
P-1 has a built-in motion sensor. When motion is detected, it can be awakened and start logging immediately. An ordinary GPS data logger will still work after the vehicle stops,in such case, it will consume more energy and produce unwanted waypoints data. When P-1 is static or has lost satellite signal for over 5 minutes, it will automatically enter standby state to maximally save energy.
The intelligent design will optimize the track data for easy information organization.
Updating the Firmware Yourself
In the future, we will continue to improve the product in time and update the firmware of P-1. You can update the firmware on the official website to ensure that the device is in top condition.
The update steps do not require special tools, it is quick and easy to operate.
Size and Weight
Size: 3.3" x 2.2" x 0.7" Weight: 2.6oz
IP66 * The rubber connector cover must be fully covered. P-1 can work normally in rain, snow and high dust environments. Do not immerse P-1 in water.
-10°C to 50°C / 14°F to 122°F
Sensitivity better than -165dBm
Built-in active antenna
Cold Start: 35 seconds
Warm Start: 32 seconds
Hot Start: 1 second
Reacquisition: <1 second
Non DGPS (Differential GPS): 2.5m/CEP(50%) 8.0m/CEP(95%)
With DGPS corrected (EGNOS / WAAS): 1.5m/CEP(30-50%) 2.5m/CEP(95%) *EPS 4th Gen
MicroSD, MicroSDHC, MicroSDXC
FAT16, FAT32 file format.
Latitude: (0.000001 degree)
Longitude: (0.000001 degree)
Altitude: -1,000 ~ 18,000 meters -3280 ~ 59000 ft (1 meters / 3ft)
Speed: 0 ~ 1,850 km/h; 0~1180 mi/h (0.1km / 0.1mi)
Heading: 0 ~ 359 (1 degree)
1. CSV (plain code format): 580 Million points
2. GPX (common exchange format): 310 Million points
3. NMEA (NMEA-0183): 210 Million points
* Use 32GB MicroSD. Waypoints amount is an approximate value and may slightly vary from different conditions.
Better than 99.998%*
* Based on our test results. Way points are lost at a probability of less than 0.002%, or no more than 1 out of every 50,000 records.
Power and Battery
Built-in1900mAh rechargeable lithium-polymer battery
Duration times*：50-55 hours
Charging time: Approx 3.5 hours
Power Supplies: DC 5V 800mA
* Continuous logging at 10Hz and 20°C environmental temperature.
Mac: OS X v10.7 or later
PC: Windows 7 or later
Linux: 2.6.12 or later